Essay proofreader

In the process of essay proofreader, you have to formulate a lot of points. This is especially true of the introduction. Here you build the backbone of the work. You must clearly write the relevance of the work, its goals, objectives, research methods, etc. Such points include scientific novelty. This is similar to relevance, but concerns only the scientific aspect. Thousands of diplomas are defended each year. Naturally, the point is to write about something new. Roughly speaking, this is the highlight of your work. If you do not even know what it is, try to explain. What is scientific novelty? A diploma is the result of your training.

You must invest in it all that you have learned, all the knowledge and skills that you have acquired. Here you have to use imagination and interest in the subject. Creative thinking will help. You should be well aware that the hackneyed topics and the hackneyed questions are boring commissions, so if you come up with a good novelty, it will be 50% success. Novelty stands out in diplomas of any specialty, both technical branches of science and humanitarian. This may be a special method of research, which will give new results, new knowledge that you obtained during the study, an unusual approach to the disclosure of a topic, etc.

You must not only come up with a feature of your work, but also justify it. These should be logical arguments in defense of your scientific novelty. What could be the novelty? More specifically, the novelty can be distinguished from the following points: Subject. You take a completely new subject of research, which no one used to study before. It can be any innovation. Purpose. If you want to get some new results that no one has achieved before you.

Method. If in this area this method is not used. Material. No one used this source or theory in research, no one turned to publications, etc. Result. You took a hypothesis and achieved what previously nobody could. How to prove it? You must prove that your novelty is really new. This can be done as follows: You take verified facts from verified sources, which prove that there was no such thing before in science. Analyze the literature and choose the facts in support of their novelty. Provide evidence that previously this information (methods, etc.) has not been used and has not been studied. In the practical part, you prove that you got new results. Prove that these results are important. An example of the formulation of novelty … is to study the nature of the relationship between the motivation to achieve and success of work by the example of specific subjects of work – the managers of a modern commercial trade organization.

Errors in novelty: The description is formulated blurry. No differences are highlighted. Not relevant to the research topic. They are of practical nature. Scientific novelty is perhaps the most difficult thing to come up with in the introduction to the thesis work. An example of the scientific novelty of a thesis can help to formulate it, but each must be unique. If you have difficulty with the formulation of the novelty of the work or other parts of it, you can contact our qualified specialists for help. They prepared a lot of unique works. We approach each diploma in a creative and individual way!

Dissertation crossword

Difficulties in completing the assignment Ideally, the assignment should be completed by the supervisor. However, as practice shows, it is you who will have to do this, and the manager will only check and, if necessary, correct it.

This is not connected with laziness or irresponsibility of the curators at all, but with the fact that by the time of the assignment you have already decided on the topic, sketched a work plan and can navigate in the literature that you will use while writing the diploma. Based on this, we can say that the example of the initial data for the thesis work is the list of the main sources on which you rely while writing a diploma.

What should the source data look like? In fact, it all depends on your specialty, topic and type of thesis. It is for this reason that this part of the assignment causes great difficulties for students, because even the curator cannot help you in this matter for the simple reason that he, in fact, does not know exactly which sources you are going to use. Based on our experience, we can say that the example of the initial data for the thesis work should look like this: The initial data should contain on average 3-5 sources. We draw your attention to the fact that if you specify five sources, then 2 of them should preferably be foreign, and 3 – domestic.

Sources need to be specified along with their complete data, and, of course, sources should be relevant to the topic of your thesis. If the base is an enterprise, then you must specify its full name, without abbreviations and abbreviations. As a literature it is necessary to use scientific works, technical documentation, but not educational literature, even if it is a reference book. What if there is no source data? Sometimes the situation is such that you have chosen a rather exotic and little-studied topic, and there is simply no source data.

 In such cases, quite often you can find advice just to copy the data from any other source: someone else’s work or the Internet. However, you should not follow such recommendations, because in order to indicate with certainty a particular source, it must be studied. Otherwise, the risk of a great mistake, which would entail not the most pleasant consequences. So even if you independently found an example of initial data for a thesis, do not rush to use it. Sometimes the situation develops in the opposite way, and there is so much data that it is simply impossible to single out the main ones and relate them to the original ones.

Custom dissertation

What materials are put in the appendix to the thesis work Sample reasoning when deciding whether to put specific material in the appendix: To determine whether this custom for disclosing the topic of the diploma.

If not, it does not need to be included in any form. So, during an internship at an enterprise, a student may be given a pack of documents with instructions to deal independently. Example 2 If the topic of the diploma is related to fixed assets, the documentation accompanying the supply of raw materials and the shipment of finished products must be ruthlessly rejected.

The application may include background information, but not those that have nothing to do with work. Estimate the amount of material and its suitability for processing. If the table is less than 2/3 of a sheet, or small statements can be made from a text document, there is no need to organize the application. Large tables, charts and non-recyclable material (drawn up in accordance with statutory forms, such as financial statements) will be correctly placed in the form of an application in the diploma.

Thus, two questions need to be addressed: whether to include material in a diploma in general, and if it is included in the main text or in an annex. Registration of applications in the diploma Examples of applications from foreign diplomas do not allow to understand what requirements are placed on this section. Let us list the requirements for the design of applications according to GOST: Regarding whether the application pages are numbered in the diploma, the GOST gives a definite answer: “The numbering of the pages of the document and the applications that make up this document should be pass-through.” If the list of used sources ends on page 67, then the first application begins on page 68.

The page numbers are signed in the same place as in the main text (most often – at the bottom in the center, at the bottom right or at the top in the center). All applications should be reflected in the table of contents (content).

Requires you to link to each application in the diploma. If the applications are really text related, this will not be a problem. A reference to the application can be formulated in the text of the diploma in a free form: “Liquidity analysis was made according to the accounting data for 2016 (Appendix A)”. Each application is printed from a new page. Upstairs is the key word “Application” and its unique designation. Further, the status of theapplicationmay be indicated (“mandatory”, “recommended”, “reference”), but diplomas usually do without it. Below is a meaningful title.

Why college education is important

Why do I need applications in the diploma? In 2019, almost all texts of diplomas are printed, “handwork” is found only in certain creative professions (for example, graduates of art schools can apply sketches and sketches made by hand on sheets of different formats to the diploma). The question arises: why arrange applications in the diploma, if you can print everything on A4 sheets (drawings printed on large formats, fold several times) and include them in the main text?

The main reasons for adding applications in the thesis work: The scope of the thesis is regulated – for example, it can be 50-70 sheets for bachelor degree, 60-80 sheets for specialty and 70-90 sheets for magistracy. Specific figures are determined by the specialty and requirements of the university, but in some cases there is a certain upper limit. Example 1 The materials used in writing a work can be 20, and 40, and 50 sheets: for example, in the work on economic analysis, a mandatory application will be financial statements for several years, possibly – the Charter of the organization, primary documents, balance sheets.

 In philological diplomas devoted to the analysis of the text, it may be necessary to attach fragments of texts. Law diplomas may include contracts, instructions and other documents. In diplomas in programming – program codes and flowcharts of algorithms. If all these materials are placed in the main text, there will simply be no space left for the text – a theoretical study, the comprehension of materials and the development of recommendations. Applications in the calculation of the volume is not taken into account. Material from the application can be used in several places of thesis. Accounting reports are the basis of the entire economic analysis – in some diplomas, the entire second chapter is devoted to it.

When reading a text, it is much easier to refer to the application (always at the end of the text), if necessary, than to search for materials in the middle of the work. Applications give more freedom in the design of graphic and tabular material. What materials are put in the appendix to the thesis work Sample reasoning when deciding whether to put specific material in the appendix: To determine whether this material is important for disclosing the topic of the diploma. If not, it does not need to be included in any form. So, during an internship at an enterprise, a student may be given a pack of documents with instructions to deal independently.

Dissertation abstracts international

It is not a secret for anyone that work on a diploma begins with the selection of a topic and a supervisor who will oversee the future graduate throughout the work on a diploma. After that, you will be given a form of the task, which indicates the topic of work, a detailed plan for the sections, a schedule of implementation, the deadline for submission of the diploma to the defense and, most importantly, the initial data. At its core, this assignment is a kind of your leadership in writing a thesis. Difficulties in completing the assignment.

 Ideally, the assignment should be completed by the supervisor. However, as practice shows, it is you who will have to do this, and the manager will only check and, if necessary, correct it. This is not connected with laziness or irresponsibility of the curators at all, but with the fact that by the time of the assignment you have already decided on the topic, sketched a work plan and can navigate in the literature that you will use while writing the diploma. Based on this, we can say that the example of the initial data for the thesis work is the list of the main sources on which you rely while writing a diploma. What should the source data look like?

In fact, it all depends on your specialty, topic and type of thesis. It is for this reason that this part of the assignment causes great difficulties for students, because even the curator cannot help you in this matter for the simple reason that he, in fact, does not know exactly which sources you are going to use. Based on our experience, we can say that the example of the initial data for the thesis work should look like this: The initial data should contain on average 3-5 sources. We draw your attention to the fact that if you specify five sources, then 2 of them should preferably be foreign, and 3 – domestic. Sources need to be specified along with their complete data, and, of course, sources should be relevant to the topic of your thesis. If the base is an enterprise, then you must specify its full name, without abbreviations and abbreviations.

As a literature it is necessary to use scientific works, technical documentation, but not educational literature, even if it is a reference book. What if there is no source data? Sometimes the situation is such that you have chosen a rather exotic and little-studied topic, and there is simply no source data. In such cases, quite often you can find advice just to copy the data from any other source: someone else’s work or the Internet. However, you should not follow such recommendations, because in order to indicate with certainty a particular source, it must be studied. Otherwise, the risk of a great mistake, which would entail not the most pleasant consequences.

So even if you independently found an example of initial data for a thesis, do not rush to use it. Sometimes the situation develops in the opposite way, and there is so much data that it is simply impossible to single out the main ones and relate them to the original ones. In such cases, do not panic and once again bother your supervisor, because you can always contact our company. We are engaged not only in writing diplomas, but also provide full support at all stages. In particular, we will be able to select for you the most optimal list of references or enterprises that will become the ideal starting data for your thesis. By entrusting this process to our authors, you can be absolutely sure that the source data was not simply copied from the Internet, since the main principle of our work is an individual approach to each individual order.